UZ12-ultralight bevelling system; the lightest bevelling system with automatic feeding on the market(max. width of bevel 12mm)
UZ12 ULTRALIGHT creates welding-ready bevels on linear plates of any shearable material, including iron, steel (up to 101 526 PSI /70 kg/mm²), stainless steel, brass, copper and aluminum. It cuts bevels from 0,12" to 1,38" / 3 to 35 mm in thickness, with a minimum plate width of 2,56" / 65 mm (depends on the angle) and plate length of 1,18" / 30 mm.
The Beveling of the tubes from ID 3,75" / 95mm.
Incredibly silent running of the machine.
The beveling angle adjustable by the help of the kit for needed angle. Available are kits for 30; 45; 37,5; 22,5 and 50 degrees.
The pressure bar unit and the piece supporting unit can be adjusted in height and are supplied with visible graduated scale.
It can be hooked to the piece to be machined in either a horizontal or vertical position. The machine can be inverted in order to bevel the bottom side of the plate. Both X and K bevels are possible.
The total weight of the machine is very low and only one person is necessary for operation of our UZ12 Ultralight
Inversion allows for creation of a double-sided bevel – no need to rotate or flip heavy material