Powerful, Easy-to-Learn Hydraulic System
- Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production
- 2 encoder-controlled hydraulic cylinders move the top beam
- Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time
- It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel)
- You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend keeps its shape
- 2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam
- Foot pedal brings the stroke up and down, leaving your hands free to position the material
- Motorized back gauge rides on a solid ball screw trolley mechanism
- Back gauge encoder shows its position on its own DRO
- Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine
- You can train your staff to use this press brake in 5 minutes
Rigid Structure and Low Maintenance
- Heavy electro welded frame, made of solid plate steel, keeps this press brake accurate and running smoothly in production for many years
- Robust 2,640-pound construction supports the hydraulic pressure, so the machine won't buckle at full capacity
- Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke
- Includes a set of hardened single-Vee American tooling
- Accepts standard press brake tooling, giving you a wide variety of options
- Comes with front material rests (or support arms), which some competing machines do not include
- 6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam
- 4 grease zerks let you add oil every few months
- Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months
Features:
- Produces up to 33 tons of pressure
- Distance Between Housings is 38"
- Bends sheet metal up to 50" wide
- Maximum capacity of 1/8" thick sheet metal across the machine's full width
- Requires 220-volt 3-phase power
- Recommended for: Small industrial shops, maintenance and R&D shops, and potentially larger industrial shops, if they need to make a specific part that fits this press brake's width